Delta Tau ADVANTAGE 900 BASIC PACKAGE Bedienungsanleitung PDF herunterladen (Seite 6)

Universal Serial Operator Control Logic Board

2 Introduction

User 1

Make pushbutton, one input

User 2

Make pushbutton, one input

User 3

Make pushbutton, one input

User 4

Make pushbutton, one input

User 5

Make pushbutton, one input

User 6

Make pushbutton, one input

User 7

Make pushbutton, one input

User 8

Make pushbutton, one input

Additional SOCLB functionality includes interfacing for the standard manual pulse generator (100 pulse

per revolution handwheel) provided on the Advantage 8xx CNC system, as well as interfacing for an

optional Delta Tau Remote Handwheel.

The SOCLB has one on-board status LED to indicate that DC power is applied. The following details the

status LED:

Label Color Comment

D3 Red When on, indicates either +12vdc or +5vdc is present at J28

SOCLB Options

The SOCLB has several options available for additional features and functionality. These options and

their associated functionalities are listed below.

• SOCLB Option 1, 12 Additional Pushbutton Panel LED Indicator Lamps

The standard Advantage 8xx has 12 pushbuttons with associated green and red LED outputs. These

LEDs are for the eight user assignable pushbuttons, cycle start, feed hold, jog plus and jog minus

pushbuttons. If the application either requires or desires additional pushbutton panel LEDs, then

order SOCLB Option 1.

Option Number Additional LEDs Comment

SOCLB Option 1 12 Green & 12 Red LEDs J16, J17, J18, J19, J20, J21, U21, U22, & U23 added

• SOCLB Option 3, Advantage 600/700 Switch Panel Support

The SOCLB can interface with an Adv 600/700 operator control switch panel if desired. When

SOCLB Option 3 is purchased, a 37-pin DB connector is added to the SOCLB (J37) to interface with

the Adv 600/700 operator control switch panel. Additionally, two relays (K1 and K2) and two 2-

screw Phoenix terminals (TB1 and TB2) are added to the board.

• SOCLB Option 4, 2x 1 x 4 Button Key Pad

Some Advantage 8xx applications may not require the rotary axis select switch provided with the

standard Advantage 8xx CNC system, but still need an input device. Delta Tau has designed SOCLB

Option 4 for these applications. When SOCLB Option 4 is ordered, two additional four-button

keypads can be interfaced to the SOCLB. SOCLB Option 4 supporting hardware includes J30, J31,

J32, J33, J34 & J35 (10 pin IDC connectors to interface with the two key pads), and U10, U24 and

U25 (one input driver device and two output driver devices so each key pad can have a green and red

LED associated with each button).

Operator Control Panel Functions

Auto Mode Pushbutton

When the Auto Mode pushbutton is pressed, the Advantage 8xx CNC system enters the Auto operational

mode. Auto mode permits the Advantage 8xx CNC system to execute G-code programs. Prerequisites

for Auto Mode operation are that all machine axes must have been referenced (homed) during machine

startup and that no axis can be on a position (software) limit or overtravel switch.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Delta Tau ADVANTAGE 900 BASIC PACKAGE Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern